ARCHITECTURE
MATERIALS FOR CONSTRUCTION
Application:
Al / Al alloy | Temper | Thickness [mm] | Proposed application |
EN AW-1050A EN AW-3005 EN AW-5005A EN AW-5754 |
Complies with standard and customer requirements | 0.4 ÷ 2.00 | Material for painting |
EN AW-1050A EN AW-3005 EN AW-5049 EN AW-5754 |
Complies with standard and customer requirements | 0.4 ÷ 1.2 | Material with STUCCO surface for the production of facades and roofing |
EN AW-1050A EN AW-5049 EN AW-5251 EN AW-5754 |
Complies with standard and customer requirements | 2.5 ÷ 4.0 | The material with five bars surface for the construction elements |
Chemical composition*:
Al / Al alloy | Si [%] | Fe [%] | Cu [%] | Mn [%] | Mg [%] | Zn [%] | Al [%] |
EN AW-1050A | 0.25 | 0.40 | 0.05 | 0.05 | 0.05 | 0.07 | min 99.50 |
EN AW-3005 | 0.6 | 0.7 | 0.30 | 1.0-1.5 | 0.20-0.6 | 0.25 | rest |
EN AW-5005A | 0.30 | 0.7 | 0,20 | 0.20 | 0.50-1.1 | 0.25 | rest |
EN AW-5049 | 0.40 | 0.50 | 0.10 | 0.50-1.1 | 1.6-2,5 | 0.20 | rest |
EN AW-5251 | 0.40 | 0.50 | 0.15 | 0.10-0.50 | 1.7-2.4 | 0.15 | rest |
EN AW-5754 | 0.40 | 0.40 | 0.10 | 0.50 | 2.6-3.6 | 0.20 | rest |
* There is a possibility to modify the alloy after prior arrangement of technical requirements
Al / Al alloy | Material for painting |
EN AW-1050A EN AW-3005 EN AW-5005A EN AW-5754 |
Sheets and strips of aluminum and aluminum alloy produced by direct casting method ensure good corrosion resistance and adhesiveness of lacquer layer. These alloys provide good properties ensuring easy molding and maintaining and holding firm mechanical properties after the painting process |
Al / Al alloy | Material with STUCCO surface for the production of facades and roofing |
EN AW-1050A EN AW-3005 EN AW-5049 EN AW-5754 |
Material with STUCCO surface for facades facade and roofing production. Sheets and strips of aluminum and aluminum alloys with STUCCO pattern have good corrosion resistance. These alloys provide very good plastic properties allowing easy molding while maintaining required mechanical properties |
Al / Al alloy | The material with five bars surface for the construction elements |
EN AW-1050A EN AW-5049 EN AW-5251 EN AW-5754 |
Material with five bars pattern surface is used for components production. Sheets and strips of aluminum and aluminum alloys with “five bars pattern” have good corrosion resistance. These alloys provide proper plasticity during the processes like bending |