ELECTROTECHNICS
MATERIALS FOR ELECTROTECHNICAL
Application:
| Al / Al alloy | Temper | Thickness [mm] | Proposed use |
| EN AW-1050A EN AW-1350A |
according to customer requirements | 0.25 ÷ 1.40 | Transformer windings |
| EN AW-3004 EN AW-3104 |
O | 0.2 ÷ 0.5 | Light and fluorescent bulbs |
| EN AW-5754 | O | 0.2 ÷ 0.5 | Light bulbs |
| EN AW-5005 EN AW-5754 |
according to customer requirements | 0.4 ÷ 2.0 | Electrical cabinets, solar panels |
Chemical composition*:
| Al / Al alloy | Si [%] | Fe [%] | Cu [%] | Mn [%] | Mg [%] | Zn [%] | Al [%] |
| EN AW-1050A | 0.25 | 0.40 | 0.05 | 0.05 | 0.05 | 0.07 | min 99.50 |
| EN AW-1350A | 0.25 | 0.40 | 0.02 | 0.03 | 0.05 | 0.05 | min 99.50 |
| EN AW-3004 | 0.3 | 0.7 | 0.25 | 1.0-1.5 | 0.8-1.3 | 0.25 | rest |
| EN AW-3104 | 0.6 | 0.8 | 0.05-0.25 | 0.8-1.4 | 0.8-1.3 | 0.25 | rest |
| EN AW-5005A | 0.30 | 0.45 | 0.05 | 0.15 | 0.7-1.1 | 0.20 | rest |
| EN AW-5754 | 0.40 | 0.40 | 0.10 | 0.50 | 2.6-3.6 | 0.20 | rest |
* It is possible alloys modification after previous agreement of technical requirements
| Aluminium | Transformer windings |
|
EN AW-1050A
EN AW-1350A
|
Pure aluminum alloys ensuring high dielectric conductivity |
| Al alloy | Light and fluorescent bulbs |
|
EN AW-3004
EN AW-3104
EN AW-5754
|
These alloys provide very good plastic properties allowing easy forming and mechanical properties and heat resistance in the process of casting glass |
| Al alloy | Electrical cabinets, solar panels |
|
EN AW-5005
EN AW-5754
|
Alloys providing proper plasticity processes such as bending. The alloys dedicated for such production are the subject for further surface treatment, eg. the application of coatings. The material may be supplied in sheets or strips |
